描述

Conveyor Belt 1 Dragging 1 –

Product Overview:

The system realizes automatic grabbing, recognition, detection and judgment of test samples, automatic cleaning of residues, and monitoring of the testing processFunctions such as automatic retention of frequency, the entire experiment is completed by robots, and the entire process is visually monitored, effectively improving the inspection of concrete compressive strength, the efficiency, standardization, and normalization of testing provide more efficient, scientific, and impartial testing data support for construction projects.

Automatic recognition and grabbing

Simultaneously recognizing QR code and barcode during robotic arm grasping·When the test blocks are not neatly arranged, the mechanical arm automatically adjusts the position.

2. Fully automated operation, eliminating safety hazards, ensuring data security and traceability.

Can achieve uninterrupted continuous operation.

4. The test piece system that does not meet the requirements will be processed in advance without the need for manual intervention. After self processing, the staff will continue to ensure safety.

5. Can produce 40 yuan per hour, with a maximum of 320 sets per day without stopping for 24 hours.

Convenient and flexible

The stacking quantity of test blocks is free and does not affect the progress of the experiment

2. The fixture does not need to be replaced and supports adaptive block specification clamping

3. The entire process only requires manual labor to ensure the availability of materials, while others can be automatically processed, including automatic residue cleaning

4. Automatic upload of experimental data and automatic generation of detection reports

Main Technical Parameters:

Max. Load Capacity: 2000KN, 3000KN
Size of Bearing Plate: 320mm×260mm
Max. distance between up and down plate: 600mm
Max. distance of Piston: 50mm
Diameter of Piston: ￠250mm
Rating compression of Hydraulic pump: 40Mpa

Installation and Debugging:

The testing machine should fix on the prefabricated & stable foundation in the size of 1200×650mm. The level is 0.2/1000, and the foundation can be suitably out of ground by 20~30mm. The distance between testing machine and wall should be less than 0.8m. There should be enough space and channel for testing. Three feet bolts (M12×300m) should be twice filled with the oar to guarantee the accurate position under-ground of the bolt.
This machine should be used under the environmental condition which is non-corrosiveness medium and non- vibration. There must be the fire protection due to the hydraulic oil.